ANIONIC ACRYLIC POLYMERS

NAME SOLIDS pH VISCOSITY Tg ATTRIBUTES View
(new)
AR-150

 
39.0-41.0%
8.0-9.0
200-800 cps
 40

The dry resin is impermeable to alkali without the use of crosslinking agents. Inks and overlay varnishes for soap boxes and household
paper towels will not be effected by the high pH of the detergent cleaner used with the paper towels.

 TDS/SDS
25-50E
49-51%
6.0-7.0
250-2,000 cps
43
Converts into low cost solution polymer for pigment grinding and high gloss flexo and gravure inks.
 TDS/SDS
25-30
29-31%
8.0-9.0
2,000-4,000 cps
43
Ammonia cut version of 25-50E. Solution polymer with good adhesion to non- porous surfaces
 TDS/SDS
CS-58
44-46%
8.0-9.0
200-500 cps
12
Binder for house paints and binder for pigment dispersio
 TDS/SDS
M-30
29-31%
7.0-8.0
1,000-2,000 cps
43
DMEA cut version of 25-50E. Suitable for metallic & florescent inks.
 TDS/SDS
M-49
48-50%
8.0-9.0
200-500 cps
22
Metallic ink or paint vehicle, exceptional stability and brilliance with metallic pigments. Also, has good water resistance
 TDS/SDS
G-35
29-31%
8.0-9.0
200-400 cps
48
Solution polymer with acid number of 200. Suitable as grinding vehicle and high gloss inks & varnishes.
 TDS/SDS
S-30
42-44%
8.0-9.0
500-1500 cps
-20
Emulsion with low Tg for adhesion to plastic films.
Suitable for flexo or gravure
 TDS/SDS
S-50
42-44%
8.0-9.0
500-1500 cps
0
Emulsion polymer with good adhesion to non­porous surfaces.
 TDS/SDS
S-75
43-45%
8.0-9.0
500-1500 cps
25
Film forming emulsion polymer suitable for inks & coatings on
paper and board
 TDS/SDS
S-100
43-45%
8.0-9.0
500-1500 cps
50
Non-film form emulsion polymer for glossy flexo and gravure inks
 TDS/SDS
SX-30
40-42%
8.0-9.0
500-1500 cps
-20
Self cross-linking emulsion for flexo or gravure printed films
 TDS/SDS
SX-50
40-42%
8.0-9.0
500-1500 cps
0
Self cross-linking emulsion with good adhesion to non-porous surfaces
 TDS/SDS
SX-75
41-43%
7.5-8.5
500-1500 cps
25
Self cross-linking emulsion with good gloss for flexo and gravure printing
 TDS/SDS
SX-100
41-43%
8.0-9.0
500-1500 cps
50
Self cross-linking emulsion, non-film forming for glossy flexo and gravure inks.
 TDS/SDS
SF-42
41-43%
7.5-8.5
100 cps Max
 5
Compatible with water reducible alkyds
 TDS/SDS
(new)
44-46%
7.5-8.5
100 cps max
 45
Unique acrylic polymer that results in a high density cross linked polymer upon drying at room temperature. Many Coatings can be derived from this polymer where solvent resistance is required.
 TDS/SDS
(new)
SF-49
48-50%
7.5-8.0
500 cps max
 3
The dry film has outstanding water resistance and will not blush even after prolonged exposure to water.
This polymer can be formulated into a corrosion resistant primer or semi-gloss paint.
 TDS/SDS
(new)
151

 
49-51%
7.5-8.5
500 cps max
 -25

Low Tg acrylic for elastomeric roof coatings. Excellent water resistance after 4 hour ambient cure of a wet 25 mil thick film.

 TDS/SDS
(new)
300

 
45-47%
8.0-9.0
40-500 cps
 5

Low odor, low dirt pick-up, low foam. Cement sealer

 TDS/SDS
(new)
1320
49-51%
8.0-10.0
500 cps max
 18

Tough, UV, chemical, abrasion & wear resistance. Tolerant
to alkali; retards efflorescence sealers for terrazzo and
masonry. Traffic paints and other exterior applications

 TDS/SDS
(new)
1450

 
42.5-43.5%
7.0-9.0
500 cps max
 24

Good UV, chemical, abrasion & wear resistance. Good
clarity, good compatibility with polyurethane dispersions.
Wood finishes & cement sealers

 TDS/SDS
(new)
1960

 
61-63%
4.0-6.0
500 cps max
 -42

Excellent adhesion to most substrates, flash rust protection.
High solids, high performance sealants & patching
compounds. Contact adhesives and coatings

 TDS/SDS